Thursday 30 January 2014

Bonding with Singer 15K80

One day early last autumn I got out the Singer 15K80 to do a quick job sewing some furnishing weight chintz.  The cotton thread I used was pretty old, it came from a wooden spool that arrived with the machine, and thicker than the usual polyester I buy.  I really struggled to get the '15' to produce anything like the kind of stitched vintage Singers usually make.  The stitches were loose at the beginning of the seams then would improve - a bit.  The best I could do was to back the top tension right off to get the top and bottom threads balanced but then the overall impression that the stitches gave was somehow sloppy.  It was hard to distinguish neat individual stitches making up the line.  Hard to explain and I didn't take any pictures at the time.

The poor quality of these stitches in spite of many rethreadings and much adjustment of the top tension were rapidly making me fall out of love with this machine.  I have often thought of the 15 as a bit of an odd ball in the Singer stable with its odd man out bobbin and bobbin case.  Three of my machines take class 66 bobbins so why did I even need the hassle of yet another type of bobbin?  For a few minutes I even considered throwing in my lot with the 15k80 and selling it.

Instead I did some thinking and research and came to the conclusion that my problems were, more than likely, related to bottom tension.

It took me quite some time before I could find some really useful practical advice on how to set up from scratch a class 15 bobbin case.  One method I watched on You Tube relied on buying a new bobbin case set up at the factory and then pulling yards and yards of thread through the tension until you develop a 'feel' for what should be the right tension - er there must be a more scientific way than that…!

And of course there is.  A big thank you to Charles Day who submitted these instructions to singersewinginfo.co.uk helping people like me (and you?) to improve the performance of their vintage Singers.

Step 1: weigh out just under one and a half ounces of sugar


Step 2:  put the sugar inside a tiny ziplock back.  The one I used came with spare buttons for one of The Much Beloved's shirts and was just the right size.


Step 3:  Tie the bobbin thread to the bag of sugar.  My bag happened to have a small hole punched in it for just that job.


Step 4:  Load the bobbin into the bobbin case.  The first time I did this I discovered that the tension on this bobbin case was so light that the bag of sugar quickly dropped to the floor sending the bobbin spinning in its case.  Ah-Ha!  So there's the cause of my sloppy stitches and inconsistent tension.


Step 5:  Using the small screwdriver; little by little I tweaked up the tension until it was sufficient to just hold the bag swinging in mid air.  A sharp upward motion should allow one to two inches of thread to be pulled off the bobbin before it comes to rest in mid air again.


Step 6:  Load the bobbin and case into the machine; check the thread path of the top thread;  adjust top tension to balance the top and bottom threads; admire the beautiful even straight stitches produced by class 15 Singers.  I think I may have just found a new favourite.


Monday 27 January 2014

A nightshirt for me: McCall 8372

After successfully sewing the onesie for The Much Beloved I thought I deserved some night attire of my own.  I couldn't see myself in a one piece.  Too reminiscent of overalls - there would be real danger of me attempting an oil change in one of those.  I took a fancy to something more old school (or should that be skool?).

McCall 8372 is excellent value as a pattern.  Just look at the many garments one can make with it.  I wonder if it was one of the last non-multi-sized patterns.  I ordered the large based on my 42 inch chest measurement.



Those of you who have read the blog will know that I am keen on free or very cheap fabric especially when practicing on a new pattern.  Regulars will also know that I am quite partial to repurposing duvet covers.

I have (had) this wonderful 100% cotton Conran duvet cover bought at Heel's ages ago.  It did years of service on my bed but it must be at least four since I've used it and it now doesn't go with anything.  It's a gorgeous cotton twill ticking and much washing has improved its beautiful soft handle.  I thought it would make a great nightshirt.

The pattern has clear instructions.  Diagrams backed up with directions which take into account whether you are using a straight stitch or zig-zag machine.  There is sufficient seam allowance for  the shoulder, armscye, and side seams to be flat felled.  The neck facings are turned under and top stitched to the wrong side for a neat finish.



The shirt features a rounded patch pocket on the left front.  I made a bit of an effort to get the stripes to match up.  I missed having reverse feed when I edge stitched the pockets.



The applied cuff bands are cut on the long grain which I think makes these stripes really pop in a good way.  They are finished off with a nice bit of edge and top stitching courtesy of the 28K.



The one point where the pattern is slightly vague is when it calls for a five eighths hem giving no further instructions.  I took this to mean - turn under a quarter inch, press, turn over a further three eighths so that the raw edge is enclosed within the second fold, press again, pin and edge stitch in place.  I hope I got it right?



The curved hem creates a shallow split where it meets the side seam.  I had to do a certain amount of fudging where the flat fell and the narrow hem meet.  It looks a lot better from the RS and is holding up to washing so far…



I made the buttonholes and sewed on the buttons using the Singer 401G and Singer slant buttonholer.  Results are consistent.  The 28K showed off a bit more with the topstitching on the front placket.



The buttons themselves are vintage brace buttons from Ede and Ravenscroft, robe makers to the Queen. High end or what?  They are rather bigger than the half inch shirt buttons recommended by the pattern but I think they are more in scale with the relaxed characteristics of the night shirt and the colour is perfect.



The finished garment is roomy but then I suppose it should be.  The fabric feels great - soft, comfy and cosy.  I made this nightshirt for a bit a giggle but have ended up wearing it quite a lot.  I used nearly half of a double sized duvet cover, thread left over from another project and three of six buttons from some worn out suit trousers.  So in theory my night shirt cost me only my time and I still have enough of everything left to make another.



"Hey - that's really nice.  I can't tell that it didn't come from a store," said The Much Beloved.  Would that be the ultimate compliment by any chance?





Monday 20 January 2014

A onesie for The Much Belovéd: Kwik Sew K3713

It seems like onesies are ubiquitous at the moment even here at Oil and Thread where we seldom follow fashion.  According to the stats the likelihood is that by now you either own a Onesie or know someone who does.  I am guessing that fewer people have actually sewn a onesie.  Unless they happen to have a copy of Kwik Sew K3713 lying around.


I thought this pattern might appeal to The Much Belovéd.  He seemed genuinely pleased when he first saw it and quite excited when I finally got down to work on it.  He tends to run around barefoot quite a bit so we agreed on version B the footless sleep suit.

I was inspired by the colour scheme on the pattern envelope and the very reasonable price of red cotton flannel.  An error on my part concerning the fabric width led me to buying twice as much winceyette as required.  During the weekend I spent shrinking, drying and ironing this fabric it felt like we were swathed in acres of red brushed cotton.

Red rag to a bull?

The pattern really isn't complicated and the instructions are first rate.  The biggest challenge is the size of the pieces.  Laying out and cutting took up a lot of space.  It's lucky the dinning table has that extra leaf!  Once the fabric was cut its size made it more than a bit of a handful.


The pattern includes a quarter inch seam allowances which are finished by zigzagging together - must be a job for the trusty 401G.  I heeded all my old sewing machine instruction books' warnings about shortening the stitch length and lightening the tension when sewing flannel.  I think this is supposed to allow the seams to 'give' a little during wear.  Kwik Sew's quarter inch seam allowances mean no trimming - refreshing!

This shade of red has proven to be virtually impossible to photograph!


The neckband and cuffs are sewn into the main body and finished in the same way.


This was my first go at sewing stretchy knits.  I did invest in some Organ needles designed especially for stretch fabric and I played it safe by sewing with my 'modern' machine.  I quite enjoyed the experience and the results are encouraging.


The pattern includes directions for either buttons or snap fastenings.  TMB put in a special request for snap fastenings so that meant buying some new kit.  I may post a full tutorial on fitting snaps at a later date.  They went on without any trouble at all and I think they work well with this pattern.


The pattern is a very generously sized.  I cut the medium based on the measurements on the pattern envelope but in my opinion the finished garment is a shade too big for TBM.  It's actually a better fit on me and I am nearer a large these days.  If I made another (remember I ended up with enough fabric for two) I would either make the small for TMB or reduce the length of the body by 1-2 inches.  TMB was however delighted with his roomy new onesie.  The proof has been in the wearing with the onesie making regular appearances at the weekend breakfast table!

The owner was not available for modelling today

Saturday 18 January 2014

New check spring for Singer 28K

This handsome little machine is my Singer 28K.  It was my first and it was this machine that got me started on sewing.  On it I sewed my first ever garment, pieced my first quilt top and then went on to quilt and bind that quilt.  It's not very easy for a beginner to quilt a single bed sized quilt on a three-quarter sized machine fitted with a fixed straight-stitch foot but the results are satisfying.

Singer 28 Sewing Machine

The machine had been given to a colleague of mine who is a wiz with fancy dress.  She didn't feel it was really the machine for her so the 28 had been stored under her desk at the office for some months.

When it arrived there really wasn't much wrong with it.  It looked like it hadn't been used for a long time and although slightly dulled and with a few blemishes there were no signs of significant rust.  It came with the essentials; a fixed straight-stitch foot, a shuttle, one bobbin and a blunt needle.  The only real problem was that the check spring, which on Singer 27/127 and 28/128, is comparatively long, unguarded and therefore vulnerable to damage, had been snapped.

The check spring is the fine wire spring which will usually be found somewhere in the region of a sewing machine's tension disks.  It's job is to remove slack in the thread as the take up arm rises to the top of its stroke after the stitch has been formed.  If the tension on the check spring is too little or the spring is missing the machine will be unable to form good stitches.


This machine was actually able to form a pretty good stitch even without a properly functioning check spring.  However I knew it would do better if it was in tip-top condition so I bought a new one.  If you are looking for one it is worth knowing that a spring from a 27 will fit a 28 and vice versa.

Singer 27 check spring

The new check spring has a loop at one end for the thread,  a long straight section, a row of even coils and one small coil at the end.  The whole thing slips neatly over the tension assembly stud.


The stud is threaded at both ends.  The narrow thread screws directly into the machine head and the split end allows the pressure on tension discs to be varied.


This photo shows the check spring in position over the tension stud.  The tail of the spring will be sandwiched between the step in the stud and the machine head casting.  This holds the spring in place and under tension.


The check spring's travel is limited top and bottom by the two notches on the machine head casting but the arm of the spring should sit on the lug mid way between these two.  The position can fine tuned by loosening the screw at the bottom of the tension assembly and sliding the slotted back plate to the left or right.


Here is a detail of the tension unit after reassembly.  The knurled nut adjusts the upper tension and shouldn't need to be much tighter than in the picture if the bottom tension is set up correctly.


With a new check spring the Singer 28k is now producing beautiful, even, balanced stitches.  Not bad work for a 115 year old!